There are many factors that may damage the roof and these factors depend on the type of roofing you have on your home. If you want to maintain and lengthen the life span of your roof, you need to know the reason behind these damages.
Lack of Proper Maintenance. It is necessary to regularly examine your roof for damages or minor conditions that need to be fixed instantly. This happens most of the time on houses with small rooftop and those without any slope. Regular examination and repair will surely protect your it against minor damages that could lead to significant water leakages.
Climate Conditions. Most roofing materials are vulnerable to damages due to the varying weather conditions. For instance, a not-so-strong wind can loosen nails on the roof and this may result in impairment. Powerful winds and flying debris can also wreck the roof, more often than not; it may wipe out some or all the roof covering. The most effective way to avoid this is to constantly inspect it as well as the insulation and ensure that it's strongly affixed to the roof deck. It's also wise to use a deck fastener instead of putting screw holes into wood decks. Many homeowners use deck fasteners as they look more appealing, and they also support the movement of wood as the seasons change thus decrease the amount of broken boards. If you reside within a snowy area, examine the roof and ensure that it can strongly withstand a heavy snowfall and that it is well sloped so the snow won't remain on it for a longer time. If your house is in the region where hailstorms always occur, you should be aware that hail could result in severe damage. Therefore, you need to meticulously examine your roof right after every hailstorm. Direct sunlight, pollutants and chemical in the air or in the rain can likewise ruin rooftop covering. Regular checkup and restoration of your roof will certainly hinder you in having major problems inevitably.
Roof Flashing Problems. Roof flashing usually stands out as the last set of protection in the battle against water penetration and is installed to watertight the boundary between roof sections, between roofing materials and other regions of the house as well as between roofing materials and roofing projections but the drawbacks of flashing is that it often result in water leaks. These leakages can destroy the ground of the roof as well as the interior of the house. Problems with flashes often takes place are caused by both design and assembly mistakes. Constant examination and repair is required in all forms of flashing in any area of the rooftop to prevent damage and create serious leakages.
Early detection of spots or damages along with competent repairs will help you prevent serious damage to your roof.
